Tricity Bendix TM 210 W User Manual download pdf (Page 10)

The tumble dryer must be installed in a clean place, where

dirt does not build up.

Make sure there are no

obstructing items or

material near the air-intake

louvres provided at the back

(e.g. paper, rags etc.).

Important

When operating the tumble dryer, the room temperature

must not exceed 35°C, as it may affect the performance of

the appliance.

To save energy, the room temperature should not be lower

than +15°C.

Levelling

Level the tumble dryer into place by screwing or

unscrewing the front feet as required.

Accurate levelling will keep vibration and noise to a

minimum when the dryer is in use.

Door reversal

To make it easier to load or unload the laundry the door

can be reversed.

This operation must be carried out by qualified

personnel.

Operate as follows:

- Remove the door by unscrewing the two screws (1)

fastening the hinge to the cabinet (Fig. A).

- Remove the safety catch (2) by pressing it downwards

(Fig. A) and refit it on the opposite side of the door.

- Using a screwdriver, remove screws (3), plastic plate (4)

and plug (5), see picture A. Take care not the damage

the cabinet.

Refit them on the opposite side (Fig. B)

- Refit the door by screwing in the two screws (1) which

fasten the door to the cabinet (Fig. B).

P0281

P0046

P0883

P0884

1 2 ... 5 6 7 8 9 10 11 12

No comments

Tricity Bendix TM 210 W User Manual Page 10